Categories
Vendors

> Assembly > Assembly Screenprinting

Displaying 1 - 6 of 6 Product(s):
Sort By:
Description : Wooden stainless steel squeegee for solder paste application Wooden stainless steel squeegee for solder paste application · Comfortable wooden handle · Can rest vertically on its wooden handle to keep work surfaces clean · Optimum size (260mm x 92mm) to match our eC-stencil-mate · Magnetic parking on the eC-stencil-mate for clean and convenient operation · Replaceable 200µm stainless steel blade
29,95 €
Description : SMD solder paste stencil printer for prototypes and small runs Fast, precise and economical solder-paste printing even for the shortest run. · Vertical separation of board and stencil – critical for accurate fine-feature printing · Uses Eurocircuits low-cost laser-cut stainless-steel stencils · Magnetic place holders and supports give sufficient manipulation possibilities to allow printing on the second side of a board that already carries components. · Simple pin-registration system based on identical tooling holes in PCB and stencil – accuracy without complex manual set-up time · Excellent registration repeatability – critical for small series printing · No clamping holes needed to support the stencil. · Rigid aluminium construction for accuracy and repeatability Maximum stencil size 390 x 290 mm Maximum PCB size 350 x 250 mm Dimensions 670 (d) x 470 (w) x 190 (h) mm Weight 19 kg
1 495,00 €
Application Cleaning the eC-stencil while in use. Clean non cured SMT adhesives. Unique Selling Points 1. does not attack the flux of the eC-solder-paste and thus does not dry out the eC-solder-paste 2. low evaporation 3. manual printed on label 4. easy dispensing tub (15x21 cm, 100pcs/tub) 5. cover lid prevents fast drying out of the pre saturated wipes 6. the eC-stencil-wipe is highly absorbant 7. lint free and long shelf life 8. can be used for cleaning misprinted PCBs Opening the eC-stencil-wipes 1. open the tub 2. pull out the packing 3. cut of the top of the packing with a scissor 4. pull out the first wipe from the centre of the roll 5. close the tub and pull the first wipe through the top 6. to pull out one wipe, pull the wipe and shear it off horizontally
22,50 €
Application Cleaning the eC-stencil after use to completely dry it. Can also be used to clean and dry PCBs and other surfaces. Do not use for cleaning the eC-stencil while in use as the eC-wipes dry out the eC-solder-paste. Unique Selling Points 1. manual printed on label 2. easy dispensing tub (15x21cm, 100pcs/tub) 3. cover lid prevents fast drying out of the pre saturated wipes 4. medium to fast evaporation 5. contains solvents which dries quickly 6. lint free and highly absorbant 7. long shelf life Opening the eC-wipes 1. open the tub 2. pull out the packing 3. cut of the top of the packing with a scissor 4. pull out the first wipe from the centre of the roll 5. close the tub and pull the first wipe through the top 6. to pull out one wipe, pull the wipe and shear it off horizontally
22,50 €
Solid mechanical construction with non backlash sliders Independent adjustment in four axes Micrometer adjusting screws Good price to performance ratio PCB Window in stencil frame: 295 x 325 mm Adjustment range X,Y axis: +/- 12.5 mm Z axis: +/- 3 mm Table rotation +/- 30 deg Adjusting precision X, Y, Z axis: 0.01 mm Dimensions and weight 600 x 400 x 400 mm, 20 kg
Call/Email For Pricing

Unique features

  • Double motoric driven manifold with liquid and air knife system to ensure direct effect
  • Synchronous spraying and drying from both sides, this prevents stencil from damaging
  • Rinsing by water or DI water
  • Heated cleaning process
Call/Email For Pricing